The MNC6V2 is a factory assembled Nixie Clock kit, which requires only minimal soldering. It is designed for people who want to quickly and easily have a full functional, fully featured Nixie Clock. There are a handful of easy to assemble components you need to put on the board, but all the hard work is already done.
The basic board features an original DS3231 highly accurate, temerature compensated RTC (Real Time Clock) time source, so that the clock always shows the right time.
Additionally you can enable the clock to use your home WiFi that makes the clock fully Internet enabled, so that the time is never wrong (even DST changes are automatic), and the WiFi integration also lets you configure the clock using an ordinary web browser.
The board comes with firmware already loaded. You do not need to program it, but can if you want. The code is open source. The clock can be programmed with any normal USB cable. A USB interface is included on the board.
The board need an external 5V USB B micro power supply.
The 5V USB adawall power supply is not included. You will need to get an external power supply (5VDC USB micro). Suitable mains wall power adapters are available on Ebay for around $3! Addtionally, we are not allowed to post the CR1220 battery, so you will have to get one of those as well.
Tools, solder and some connecting wire is not included.
WiFi kit (no tubes): You get the populated main PCB and the display board PCBs of your choice. The controller is already programmed. A small bag of Additional parts is also included.
Bare board: You get the main PCB and the display board PCBs. You will need to source all of the other parts (headers, switches, connectors), which are easily available from distributors or Ebay. We don't use very hard to find or special parts.
This is a full kit of parts, including tube holders of your choice. Please also add the holders you want to the cart. By default WiFi is included but not turned on. With a button press you can enable this board to run with your home WiFi. If you don't want WiFi, the high precision DS3231 RTC chip will keep the time.
This is the main board only, fully populated with SMD components and programmed, but you have to get all the rest of the components according to the manual yourself. The controller is programmed. Please also add the holders you want to the cart. The board has optional WiFi and the DS3231 RTC chip as well.
These are the tube holders to go with the main board. They are included in the price.
These are the tube holders to go with the main board. They are included in the price.
These are the tube holders to go with the main board. They are included in the price.
These are the tube holders to go with the main board. They are included in the price.
These are the tube holders to go with the main board. They are included in the price.
These are the tube holders to go with the main board. They are included in the price.
These are the tube holders to go with the main board. They are included in the price.
These are the tube holders to go with the main board. They are included in the price.
These are the tube holders to go with the main board. They are included in the price.
These are the tube holders to go with the main board. They are included in the price.
These are the tube holders to go with the main board. They are included in the price.
A 3D printed case including neon tower supports in black PLA material.
A 3D printed casde including neon tower supports in dark blue PLA material.