Assembled 4-Digit Small Tube Nixie Clock
The SNC6 is a factory assembled Nixie Clock kit, which requires only minimal soldering. It is designed for people who want to quickly and easily have a full functional, fully featured Nixie Clock. There are a handful of easy to assemble components you need to put on the board, but all the hard work is already done.
The basic board features an original DS3231 highly accurate, temerature compensated RTC (Real Time Clock) time source, so that the clock always shows the right time.
Additionally you can also purchase a WiFi add-on module that makes the clock fully Internet enabled, so that the time is never wrong (Eeven DST changes are automatic), and the WiFi integration also lets you configure the clock using an ordinary web browser.
The board comes with firmware already loaded. You do not need to program it, but can if you want. The code is open source.
The wall power supply is not included. You will need to get an external power supply (9VDC - 12VDC, center positive). Suitable mains wall power adapters are available on Ebay for around $3!
Tools, solder and some connecting wire is not included.
Basic kit (no tubes): You get the main PCB including the connectors and tube boards, as well as the additional WiFi module. You will need to add the tubes and the wall power supply.
WiFi kit (no tubes): You get the main PCB and the display board PCB, and a pre-programmed wemos controller. You will need to source all of the other parts, which are easily available from distributors or Ebay. We don't use very hard to find or special parts.
Bare boards: You get the main PCB and the display board PCB. You will need to source all of the other parts (headers, switches, connectors), which are easily available from distributors or Ebay. We don't use very hard to find or special parts.
$58
Basic kit IN-12
This is a full kit of parts, including the IN-12 tube display board and the receptacle pins. If you don't need any of the parts, please just delete them from the cart in the next step.
$68
WiFi kit IN-12
This is a full kit of parts, including the optional WiFi module, the IN-12 tube display board and the receptacle pins. If you don't need any of the parts, please just delete them from the cart in the next step.
$48
Basic kit IN-2
This is a full kit of parts, including the IN-2 tube display board. If you don't need any of the parts, please just delete them from the cart in the next step.
$58
WiFi kit IN-2
This is a full kit of parts, including the optional WiFi module, the IN-2 tube display board. If you don't need any of the parts, please just delete them from the cart in the next step.
$35
Bare boards
This is the main board only and the display board of your choice, you have to get all the rest of the components according to the manual (connectors, switches, K155ID1). The controller is programmed.
$0 (included)
Display board for IN-12
This is a display board to go with the main board. It is included in the price. This board requires pin receptacles, you can add these to the cart (see below) if you need them.
$0 (included)
Display board for IN-2
This is a display board to go with the main board. It is included in the price of the kit. Please contact us if you want to order more than one display board with your kit.
$0 (included)
Display board for IN-17
This is a display board to go with the main board. It is included in the price of the kit. Please contact us if you want to order more than one display board with your kit.
$10
Set of Receptacle Pins
These receptacle pins are needed for the IN-12 display board. These can only be ordered with a kit. These mean that the tubes do not have to be soldered in and can be very easily replaced.