f Arduino 6-Digit Nixie Clock

DA-2000 Numitron Clock

The 6-Digit "Wemos" Numitron Clock kit is a fully Internet enabled clock based on the Wemos D1 R2 mini. The Wemos clock connects to your WiFi and always keeps the time correct. Setting the clock is alse done with a browser using a computer, phone or tablet. Once you have set it up you can forget the clock. It will keep itself right forever.

In the case that WiFi is not available, the clock falls back to the internal RTC (Real Time Clock) time provider, so that the clock always shows the right time.

This kit is a simple to build (with excellent and clear instructions) and should take you only a couple of hours to construct.

The controller comes pre-programmed, and you can update the code using "Over The Air" (OTA) updates. You don't need any special programming equipment!

Note that this clock is currently not open source.

The current construction and user manual is available here: Manuals

The wall power supply is not included. You will need to get an external USB power supply with a USB "B" ("Micro USB") connector on it. These are the same as used by smartphones, and you almost certainly already have one in a draw at home.

Tools, solder and some connecting wire is not included.

Full kit of parts WITH tubes: You get all of the electronic components on the PCB, as well as the tubes and LEDs.

Full kit of parts (no tubes): You get all of the electronic components on the PCB, but no tubes, which you need to get yourself.

PCBs and controller: You get the main PCB and the display board PCB, and a pre-programmed wemos controller. You will need to source all of the other parts, which are easily available from distributors or Ebay. We don't use very hard to find or special parts.

PCBs only: You get the main PCB and the display board PCB. You will need to source all of the other parts, which are easily available from distributors or Ebay. We don't use very hard to find or special parts. You will need to flash the controller with our firmware.

With our kits you are not alone! You can get online help at the forum, or you can contact us using email. We will get you going. We want to have you 100% satisfied, and our no-questions-asked support policy means that you will succeed. We even run a "return to base" repair service for hard to crack cases. Simply send the board back to us and we will fix it. You only pay the postage!

Cart contents
Enter Email Address
USD cost
DA-2000 Numitron Clock

$120

DA-2000 Numitron Clock - full kit of parts WITH tubes

This is a full kit of parts, including selected and matched New Old Stock DA-2000 tubes, but excluding a mains power adapter. Note that there is an additonal shipping charge of $18 included in the price because of the tubes.

DA-2000 Numitron Clock

$40

DA-2000 Numitron Clock - full kit of parts WITHOUT tubes

This is a full kit of parts to build the Numitron clock, excluding tubes and mains power adapter. You can add your own tubes (RCA DR-2000 also works). Note that DA-2000, DR-2000, DA-2010 and DR-2010 are compatible.

DA-2000 PCB and Controller

$20

DA-2000 Numitron Clock - PCB/Controller

This is the PCB needed to build the clock, as well as a pre-programmed Wemos micro-controller. You need to add the rest of the parts. See the construction manual for the full BoM.

DA-2000 PCB

$15

DA-2000 Numitron Clock - PCB Only

This is the PCB needed to build the clock. You need to flash the controller and get all of the components and tubes. See the construction manual for the full BoM.

© 2017-2019 Ian's Nixie Clocks.